Washer Fluid Chevrolet Silverado 1500

What to Use.

When windshield washer fluid needs to be added, be sure to read the manufacturer's instructions before use. Use a fluid that has sufficient protection against freezing in an area where the temperature may fall below freezing.

Adding Washer Fluid.

The vehicle has a low washer fluid message on the DIC that comes on when the washer fluid is low. The message is displayed for 15 seconds at the start of each ignition cycle. When the WASHER FLUID LOW ADD FLUID message displays, washer fluid will need to be added to the windshield washer fluid reservoir.

Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See [linkin] Engine Compartment Overview 0 328 for reservoir location..


• Do not use washer fluid that contains any type of water repellent coating. This can cause the wiper blades to chatter or skip.

• Do not use engine coolant (antifreeze) in the windshield washer. It can damage the windshield washer system and paint.

• Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system.

• When using concentrated washer fluid, follow the manufacturer instructions for adding water.

• Fill the washer fluid tank only three-quarters full when it is very cold. This allows Caution. for fluid expansion if freezing occurs, which could damage the tank if it is completely full.

  • Pages

    open all | close all