Ignition Positions (Key Access) Chevrolet Silverado 1500
0. Stopping the Engine/LOCK/OFF
1. ACC/ACCESSORY
2. ON/RUN
3. START The ignition switch has four positions.
To shift out of P (Park), the ignition must be ON/RUN and the brake pedal must be applied.
0 (Stopping the Engine/LOCK/ OFF) : This position turns off the vehicle. It also locks the ignition, the transmission, and the steering column, if equipped with a locking steering column.
To turn off the vehicle:
1. Make sure that the vehicle is stopped.
2. Shift to P (Park).
3. Continue to hold the brake pedal, then set the parking brake. See [linkin] Electric Parking Brake 0 229.
4. Push the key all the way in toward the steering column, then turn the key to LOCK/OFF.
5. Remove the key.
6. Release the brake pedal.
See [linkin] your dealer if the key can be removed in any other position.
Retained Accessory Power (RAP) will remain active. See [linkin] Retained Accessory Power (RAP) 0 213.
A warning chime will sound when the driver door is opened and the key is in the ignition.
If equipped with a locking steering column, the steering can bind with the front wheels turned off center, which may prevent key rotation out of LOCK/OFF. If this happens, move the steering wheel from right to left while turning the key to ACC/ ACCESSORY. If this does not work, then the vehicle needs service..
[symbolwarning] Warning.
Turning off the vehicle while moving may cause loss of power assist in the brake and steering systems and disable the airbags.
While driving, turn off the vehicle only in an emergency.
In an emergency, if the vehicle cannot be pulled over and must be turned off while driving:
1. Push the key all the way in toward the steering column, then turn the key to ACC/ ACCESSORY.
2. Brake using firm and steady pressure. Do not pump the brakes repeatedly. This may deplete power assist, requiring increased brake pedal force.
3. Shift the vehicle to N (Neutral).
This can be done while the vehicle is moving. Continue braking and steer the vehicle to a safe location.
4. Come to a complete stop.
5. Shift to P (Park).
6. Push the key all the way in toward the steering column (1), then turn the ignition to LOCK/OFF (2).
7. Set the parking brake. See Electric Parking Brake 0 229.
8. Remove the key.
9. Release the brake pedal..
Caution.
Use the correct key, make sure it is all the way in — or pushed all the way in toward the steering column when turning off the vehicle — and turn it only with your hand.
1 (ACC/ACCESSORY) : This position allows features such as the infotainment system to operate while the vehicle is off. It also unlocks the steering column, if equipped with a locking steering column. Use this position if the vehicle must be pushed or towed.
See [linkin] Retained Accessory Power (RAP) 0 213.
From ON/RUN, push the key all the way in toward the steering column, then turn the key to ACC/ ACCESSORY.
If the key is left in ACC/ ACCESSORY with the engine off, the battery could drain and the vehicle may not start.
A warning chime will sound when the driver door is opened and the key is in the ignition.
2 (ON/RUN) : This position can be used to operate the electrical accessories and to display some instrument cluster warning and indicator lights. This position can also be used for service and diagnostics, and to verify the proper operation of the malfunction indicator lamp as may be required for emission inspection purposes.
The switch stays in this position when the engine is running. The transmission is also unlocked in this position.
If the key is left in ON/RUN with the engine off, the battery could drain and the vehicle may not start.
3 (START) : This is the position that starts the engine. When the engine starts, release the key. The ignition returns to ON/RUN for driving.
